Programable Features: - Dead Band Width - Direction of Rotation - Speed of Rotation (slower) - End Points (up to 180 degrees) - Neutral Points - Fail Safe On/Off - Fail Safe Points - Resolution (default is set at high) - Overload Protection (default is off)
Control System: +Pulse Width Control 1500usec Neutral Required Pulse: 4.8-6.0 Volt Peak to Peak Square Wave Operating Voltage Range: 4.8-6.0 Volts Operating Temperature Range: -20 to +60 Degree C (-68F to +140F) Operating Speed (4.8V): 0.17sec/60° at no load Operating Speed (6.0V): 0.13sec/60° at no load Stall Torque (4.8V): 50oz/in. (3.6kg.cm) Stall Torque (6.0V): 59.7oz/in. (4.3kg.cm) Operating Angle: 45 Deg. one side pulse traveling 400usec 360 Modifiable: Yes Direction: Clockwise/Pulse Traveling 1500 to 1900usec Idle Current Drain (4.8V): 3mA at stop Idle Current Drain (6.0V): 3mA at stop Current Drain (4.8V): 200mA/idle and 2.0 amps at lock/stall Current Drain (6.0V): 240mA/idle and 3.0 amps at lock/stall Dead Band Width: 2usec Motor Type: Carbon Brush Potentiometer Drive: 6 Slider Indirect Drive Bearing Type: Dual Ball Bearing MR106 Gear Type: Metal Gears Connector Wire Length: 7" (178mm) Dimensions: 1.14" x 0.51"x 1.18" (29 x 13 x 30mm) Weight: .77oz (21.9g)
